1969 69 Corvette Convertible L46 1968 1970
Contact the seller
North Dartmouth, Massachusetts, United States
Features and Specifications
1969 Chevrolet Corvette
Original L-46 Car
Factory Monza Red on Red Interior
Original Engine and Drivetrain
Original Air Conditioned car.
Have all AC Components and side pipe covers and insulators.
All original pulleys, fan, etc.
Both Hard and Soft Top Include
Clean MA title in my name
Has factory Big Block hood in nice shape.
Some of the interior converted to white from 75 or 76 Corvette. Seat and door panels.
Would make great restoration project or killer resto-mod project and keep the original drivetrain
Worth more in parts than my reserve/buy it now price.
All parts included are shown in the pictures.
Pretty much needs everything. No seat belts or hardware. Dash pad in nice shape. All Original gauges there but faces are rusted. Tilt/Telescoping wheel works but chrome levers are rusted as is e-brake handle. Has steering wheel from mid-seventies C3 in good shape. Door panels are from mid-seventies C3 but have some cracks. Has one kick panel but was cut for speakers. Seats are from mid-seventies C3 but are in rough shape but tracks move free. Original shifter but has old school T-handle with reverse lockout. Windshield pillar trim there but probably should be replaced. No carpet. Hinges for storage/battery compartments should be replaces. Quarter panel trim pieces there. Has sun-visor rods but needs soft parts of sun-visors.
Original numbers matching L46 with correct VIN stampings. Original Camel hump 202 big valve heads. Engine seems to run well with good oil pressure and no knocks. All original pulleys, fan, radiator shroud, exhaust manifolds, etc. Original distributor but not hooked up to tach cable since someone changed the intake and didn’t clock the distro right. Some of the ignition wire shielding (see pics). Only thing that doesn’t look original is intake, carb, air cleaner. Original AC compressor and brackets. Original transmission and looks to be original differential. No air cleaner.
Nice original rally wheels all around. Nice trim rings and center caps. Tires hold air and are good as rollers but need to be changed for street use.
Straight body with no signs of accidents or past repair. Fiberglass body in great shape with no signs of accidents or modifications. Needs driver side door. Passenger’s door seems very fixable and fiberglass is in great shape. Doors open and close nice. Some very minor/stress cracks around headlight buckets but they are typical and an easy fix. Body was stripped down and coated in primer so you can see what you get. Some of the emblem holes were filled in with bondo (not sure why they would do that) but can be easily located and drilled out.
Windshield Frame and Lower Cowl has some rust and rot. All pieces seem to be available through Zip Corvette and other suppliers.
Engine Cross Member lower plate only has some rust holes. Can buy this piece from Zip Corvette (about $150) and is an easy fix
One Frame truss is rotted near the driver’s side kick up. Can also buy this piece and is an easy fix.
One seat belt reinforcement rusted out.
One Body Mount should be replaced where it is riveted to the body. Drivers side rear.
Rest of frame seems very solid including kick ups. Definitely better than most and an easy repair.
Radiator Support rusted. About $200 through various suppliers.
Lower Radiator Support Cross member rusted but this is a bolt on piece readily available.
Fiberglass good and uncut. No signs of accidents
Clear MA title in my name. Will have no issue registering it.
Nice OEM Rally wheels, centercaps and trim rings all around
Have all side pipe components. All metal complete with no pieces broken off. Need refinishing. Fiberglass insulators have one small piece broken off but included.
Original Glass in decent shape with the exception of the windshield.
All AC components intact including original compressor
Doors open and close nice
What it’s missing:
Seats Belts/Seat Belt Trim
One kick panel
Front and Rear Bumper
Front Bumper Brackets
Grill and Grill Trim
Original Door Panels
One rear Caliper and Rotor
Gas tank and filler neck
Spare Tire Carrier
Original Intake and Carb
Radio and Antenna
Some of spark plug wire shielding
Front Corvette emblem between the headlights
Rear “c-o-r-v-e-t-t-t-e’ letters
What else is wrong:
Rust on gauge faces
Seats in poor shape. Some rusted/broken springs
Power steering ram seems to have a slow leak. No belt currently going to power steering pump (it was like that when I bought it)
Probably other stuff I am missing, so please ask questions BEFORE bidding. I included a picture of all the loose parts I have for the car. If it is not shown in the pic I likely do not have it.
A $500 dollar deposit is required within 3 day after auction ends. Balance of payment due no later than 7 days after end of auction unless prior arrangement are made. Payment shall be cash, bank check, or bank transfer.
Buyer will pay all shipping cost, however I can help load car on the transport. Note that this car is not drivable (running off plastic gas can, no brakes) and will need to be winched on a trailer or flatbead.
This is an almost 50 year old car and is being sold as a project car. Car is sold as is with no warren expressed or implied. I’ve tried to describe this car to best of my ability but may not have covered every little thing. It is the buyer’s responsibility to inspect this vehicle before purchasing or have it inspected by a 3rd party. $500 dollar deposit is not refundable.
Also NOTE!! : I take great care to make sure I have clean paperwork with the cars I sell. If you buy the car you will get the clean MA title signed over to YOU as well as a bill of sale with my name and yours. I will not leave the title or paperwork blank so you can easily sell the car to someone else without putting it in your name first. Sorry, but I would rather deal completely on the up and up.